[j-nsp] policer useless

[Robert Craig]

Please contact Juniper support so they may assist in configuring 
policing suitably for your application.

Thanks,
Robert.

On Wednesday, September 11, 2002, at 11:56 AM, Blaz Zupan wrote:

>> Try multiplying the rate you want by 1.25; I don't recall the exact 
>> number,
>> but this is approximately the factor between bytes on the line and 
>> bytes
>> required to transport them on J-cells thru the shared memory.
>
> Actually I tried setting the policer to 8m, the result was a transfer 
> rate of
> 390 kbytes/s. I find no logic in this...
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp