[j-nsp] Route Reflection

[Cody DeNiro]

Jay,

This can be any ip on the router or it can be some other significant number
in dotted decimal. It is placed in the cluster_id field of reflected route
updates to prevent loops.

Cody


----- Original Message -----
From: "Jay Young" <jay@net.ohio-state.edu>
To: <juniper-nsp@puck.nether.net>
Sent: Thursday, September 19, 2002 12:06 PM
Subject: [j-nsp] Route Reflection


Juniper documentation says:

cluster-identifier -- IP address to use as the cluster identifier.

What IP address should be used and what is it used for?

Any pointers would be very helpful.

Thanks,
Jay

--
Jay Young |Office of Information Technology
Network Engineer |The Ohio State University
Phone: (614) 292-7350 |320 West 8th
Fax:   (614) 292-9525 |Columbus, OH 43201


_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp