[j-nsp] Implementing Ethernet Aggregated Features

[Dmitri Kalintsev]

Hi,

On Thu, Apr 03, 2003 at 02:02:16PM -0500, NAIDOO Kesva FTLD/IAP wrote:
> The FXP interface is only for out of band management on Juniper routers. You
> cannot run any  dynamic routing protocols on these interfaces as well. Only
> allowed static routes.

You *can* run dynamic routing protocol(s) on fxp0; moreover, there are
scenarios when this is desirable. What you *cannot* do is to forward packets
between interfaces in forwarding plane and fxp0.

P.S. There is not much difference from rpd's standpoint between static
and dynamic routes.

> Kesva

SY,
--
D.K.