[j-nsp] Junos CoS - how to set PLP bit depending on a Bandwi dth threshold ?

[Guy Davies]

-----BEGIN PGP SIGNED MESSAGE----- 
Hash: SHA1 

Hi Mourad, 
  
The simple answer is "yes". 
  
firewall { 
    policer <blah> { 
        if-exceeding { 
            bandwidth-percent N; 
            burst-size M; 
        } 
        then { 
             loss-priority (high|low); 
             forwarding-class <foobar>; 
             discard; 
       } 
    } 
} 
  
Regards, 
  
Guy 

- -----Original Message----- 
From: Mourad BERKANE [ mailto:mourad.berkane at lambdanet.fr
<mailto:mourad.berkane at lambdanet.fr> ] 
Sent: Tuesday, August 05, 2003 1:24 PM 
To: juniper-nsp at puck.nether.net 
Subject: [j-nsp] Junos CoS - how to set PLP bit depending on a Bandwidth
threshold ? 




Is it possible with current Junos version to associate the class-of-service
classification of the *internal* CoS PLP bit(used by RED drop profile) with
a bandwidth policer:

IF BW > threshold       THEN    plp-set         ELSE    plp-clear 

Hope it's possible :-) 

Thanks in advance. 
Mourad 


-----BEGIN PGP SIGNATURE----- 
Version: PGP 8.0 

iQA/AwUBPy+oSI3dwu/Ss2PCEQIA/QCgzGZdEtpWyhkC1Gr1KRb/fnCja+IAn2GN 
IvGoUWeB1s4VlBn+xdxPcibg 
=EO6N 
-----END PGP SIGNATURE----- 
  

  
  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PGPexch.rtf.pgp
Type: application/octet-stream
Size: 1719 bytes
Desc: not available
Url : http://puck.nether.net/pipermail/juniper-nsp/attachments/20030805/3e77897c/PGPexch.rtf-0001.obj