[j-nsp] Source based routing on m160 with Junos 5.5R2.3

[Nicolas Fevrier]

Hi Jeroen,

Policy Based Routing is called FBF (Filter Based Forwarding) in the Juniper
world,
check this out,
http://www.juniper.net/techpubs/software/junos/junos55/swconfig55-routing/ht
ml/instance-config13.html#1014931

Cheers,

Nicolas.

# -----Message d'origine-----
# De: Jeroen Veen [mailto:J.Veen at Planettechnologies.nl]
# Date: jeudi 7 août 2003 13:46
# À: juniper-nsp at puck.nether.net
# Objet: [j-nsp] Source based routing on m160 with Junos 5.5R2.3
# 
# 
# Hi,
# 
# Any help on the following would be very much appreciated:
# 
# We have a bunch of gigabit ethernet links on which we receive 
# DSL traffic from our DSL provider. We also want to run a DSL 
# testnetwork over these same links. The traffic from this 
# testnetwork needs to be routed somewhere else than the normal traffic.
# 
# Given that we cannot change anything on the router we get the 
# traffic from (not our machine), so no vpn, vlan, tunnel, mpls 
# or such, is there any way to do a sort of source routing thing?
# 
# Basically we need to route the existing DSL traffic normally 
# and we want the testenvironment traffic routed somewhere 
# else, based on the 172.16.x.x source address that the packets 
# will have.
# 
# As mentioned in the subject, the router in question is an 
# M160 with Junos 5.5R2.3.
# 
# Thanks,
# 
# Jeroen
# 
# _______________________________________________
# juniper-nsp mailing list juniper-nsp at puck.nether.net
# http://puck.nether.net/mailman/listinfo/juniper-nsp
#