[j-nsp] ERX, RADIUS & Framed-IP-Address

[Listuser]

Thanks in advance.. Figured it out, need to add the following to the OSPF 
process:

redistribute access-internal

Art.

At 03:10 PM 08/24/2003, Listuser wrote:
>Hello Folks,
>
>Do you guys know if there is any way to get an ERX to export connected 
>routes from an ERX. The connected route comes from the RADIUS 
>Framed-IP-Address attribute. This works from a Cisco AS5300/AS5400, Nortel 
>Shasta etc. however I cannot seem to get the ERX to advertise the route 
>via OSPF.
>
>It does advertise the routes from the local pool correctly.
>
>Any suggestions?
>
>Thanks much in advance.
>Art
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp