[j-nsp] vlan tagging

[Kent Yu]

> Antonio,
>
> >
> > Is that feature available only in some IOS versions?  It doesn't exist
on
> > any of the Ciscos we have here.
> >
>
> It is a CatOS feature.
>
> Thanks
> German

!
interface FastEthernet0/0.1
 encapsulation dot1Q 10 native
 ip address 1.1.1.5 255.0.0.0


Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(13)T1,  RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 04-Jan-03 08:20 by ccai
Image text-base: 0x80008098, data-base: 0x8193CA78

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router_E uptime is 1 week, 1 day, 21 hours, 58 minutes
System returned to ROM by error - a SegV exception, PC 0x808C67AC
System image file is "flash:c2600-j1s3-mz.122-13.T1.bin"

cisco 2621 (MPC860) processor (revision 0x101) with 60416K/5120K bytes of
memory.
Processor board ID JAB0333058T (610116485)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102









>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>