[j-nsp] Filtering OSPF routes

Wayne (juniper nsp) wg-jnpr-nsp at wgustavus.com
Sat Feb 15 23:34:53 EST 2003


MessageActually, if you are running a sufficiently high enough version of IOS (e.g. 12.0S), the 7200 can filter some LSAs.  It depends on your exact scenario if this will accomplish what you are trying to do.  It does tend to go contrary to the design of OSPF (or any link state protocol), but I suppose enough people wanted the knob, so they got it.

Not sure if JUNOS has a similar knob.

- Wayne 

----- Original Message ----- 
  From: Ben Buxton 
  To: Ajay Bhardwaj ; juniper-nsp at puck.nether.net 
  Sent: Monday, February 10, 2003 4:18 AM
  Subject: RE: [j-nsp] Filtering OSPF routes



  You cannot filter OSPF. This would break the requirement that all routers have
  the same link state view.
  This is true for both Junos and IOS.

  BB
    -----Original Message-----
    From: Ajay Bhardwaj [mailto:ajay.bhardwaj at in.spectranet.com] 
    Sent: Monday, 10 February 2003 08:39
    To: juniper-nsp at puck.nether.net
    Subject: [j-nsp] Filtering OSPF routes


    Hi all,

    We have cisco 7200 router and M-5 router both running ospf and part of area 10.

    I want to deny few routes which are flowing trough ospf from 7200 to m5 either at 7200 side or m5 side. Pls if anyone have any solution to this would be gr8 help for me.

    Ajay Bhardwaj



------------------------------------------------------------------------------


  _______________________________________________
  juniper-nsp mailing list juniper-nsp at puck.nether.net
  http://puck.nether.net/mailman/listinfo/juniper-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://puck.nether.net/pipermail/juniper-nsp/attachments/20030215/268e1116/attachment.htm


More information about the juniper-nsp mailing list