[j-nsp] Viewing Prefix-Specific Action statistics
John Ou
jou at juniper.net
Fri Feb 28 14:17:21 EST 2003
Cheeyong,
Here is link for the explanation:
http://www.juniper.net/techpubs/software/junos/junos56/swconfig56-policy/htm
l/policer-config10.html
Thanks.
--John
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Tay Chee Yong
Sent: Thursday, February 27, 2003 5:56 PM
To: John Ou
Cc: juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Viewing Prefix-Specific Action statistics
Hi John,
Would appreciate if you could direct me to the URL where is userdoc resides
in.
Can't seems to find it on Juniper website.
Thanks again.
Regards,
Cheeyong
On Thu, 27 Feb 2003, John Ou wrote:
: It represents the counter number for the corresponding prefixes.
: The maximal PSA counter can be displayed is 2^16=65536 (0-65535).
: It is one-to-one mapping to the host in ascending order. See
: the userdoc in detail. Thanks.
: --John
: -----Original Message-----
: From: Tay Chee Yong [mailto:tcy at pacific.net.sg]
: Sent: Thursday, February 27, 2003 8:21 AM
: To: John Ou
: Cc: juniper-nsp at puck.nether.net
: Subject: RE: [j-nsp] Viewing Prefix-Specific Action statistics
:
:
: Hi John,
:
: Some questions.
:
: What does the number 0-65535 behind the name/policer means? Does it refer
to
: the
: policer for the particular prefix? How do I know which policer is mean for
: which
: /32 address?
:
: Does the values here refers to the number of bytes/packets within the 256k
: shaping, or number of bytes/packets being discard.
:
: Please advise.
:
: Thanks.
:
: Regards,
: Cheeyong
:
: On Thu, 27 Feb 2003, John Ou wrote:
:
: : Cheeyong,
: : The correct syntax should be
: : > run show firewall prefix-action-stats filter inbound-acl prefix-action
: : police-per-prefix-shape
: : You need append the term name to the prefix-acton with "-" in order to
: view
: : the policer counters for that term. Let me know if it works. Thanks.
: : --John
: : -----Original Message-----
: : From: juniper-nsp-bounces at puck.nether.net
: : [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Tay Chee Yong
: : Sent: Thursday, February 27, 2003 7:48 AM
: : To: juniper-nsp at puck.nether.net
: : Subject: [j-nsp] Viewing Prefix-Specific Action statistics
: :
: :
: : Hi People,
: :
: : I had implemented the Prefix-Specific Action on our Juniper routers, and
: it
: : working well. However, I am unable to view the statistics of how many
: : packets/bytes had been policed/discard by the policer.
: :
: : My configuration is as follows:
: :
: : [edit firewall]
: : user at router# show
: : policer rate-256k {
: : if-exceeding {
: : bandwidth-limit 256k;
: : burst-size-limit 32k;
: : }
: : then discard;
: : }
: : family inet {
: : prefix-action police-per-prefix {
: : policer rate-256k;
: : count;
: : subnet-prefix-length 21;
: : destination-prefix-length 32;
: : }
: : }
: :
: : [edit firewall filter <inbound-acl>]
: : user at router# show
: :
: : term shape {
: : from {
: : destination-address {
: : 192.168.0.0/21;
: : }
: : protocol tcp;
: : }
: : then {
: : sample;
: : prefix-action police-per-prefix;
: : }
: : }
: :
: : However, using the command "show firewall prefix-action-stats" is unable
: to
: : produce any statistics.
: :
: : user at router# run show firewall prefix-action-stats filter inbound-acl
: : prefix-action police-per-prefix
: : Filter: inbound-acl
: :
: : Could someone please enlighten me? Thanks.
: :
: : Regards,
: : Cheeyong
: : _______________________________________________
: : juniper-nsp mailing list juniper-nsp at puck.nether.net
: : http://puck.nether.net/mailman/listinfo/juniper-nsp
: :
:
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list