[j-nsp] address on flow monitoring

Lars Higham lhigham at yahoo.com
Tue Jul 8 12:46:18 EDT 2003


Good question -

It seems that you just need to enable ipv4 on it with some address:
http://www.juniper.net/techpubs/software/junos/junos57/feature-guide-57/
html/fg-flow-monitoring31.html


Regards,
Lars

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Daniel
Sent: Tuesday, July 08, 2003 4:15 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] address on flow monitoring



 Where does the 10.1.1.1/32 and destination 10.1.1.2 addresses come
from, 
on this configuration example 
http://www.juniper.net/techpubs/software/junos/junos57/feature-guide-57/
html/fg-flow-monitoring37.html#1117837


is it mandatory or just optional? thanks

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list