[j-nsp] Problems commiting changes to firewall filter

[Matti Saarinen]

Walter De Smedt <wdesmedt at pandora.be> writes:

> After updating a firewall filter with a new term, i get following error
> msg in the syslog:
>
> Jul 18 18:10:48 xxxxx mgd[1041]: UI_COMMIT_QUIT: User 'wds' performed
> 'commit and-quit'
> Jul 18 18:10:49 xxxxx /kernel: BAD_PAGE_FAULT: pid 1052 (dfwc), uid
> 0: pc 0x804f366 got a read fault at 0xa, x86 fault flags = 0x4
> [snip]
> Jul 18 18:10:49 xxxxx dcd[1051]: DCD_FW_COMPILER_EXIT: dfwc exited
> with signal 11

     I remeber having the same problem with 5.4R2.4. The problem was
     fixed in 5.4R3 and 5.5R2 according to the email I've received
     from our Juniper support in November. Unfortunately, I don't have
     the PR number of this problem. Also, I don't remeber whether I
     was able come up with some workaround.

     Cheers,

-- 
- Matti -