[j-nsp] allow-command question

[MPuras at solunet.com]

I ran into this a few weeks back in the lab.  What I ended up doing was
ctrl+] and quit.  Perhaps not the best or cleanest way to do it but it
works.



Thanks, 

Mario Puras 
SoluNet Technical Support
Mailto: mpuras at solunet.com
Direct: (321) 309-1410  
888.449.5766 (USA) / 888.SOLUNET (Canada) 



>-----Original Message-----
>From: Nicolas Fevrier [mailto:nicolas.fevrier at telindus.fr]
>Sent: Monday, July 28, 2003 10:14 AM
>To: Mourad BERKANE; Nicolas Fevrier
>Cc: 'juniper-nsp at puck.nether.net'
>Subject: RE: [j-nsp] allow-command question
>
>
>Hi Mourad :))
>
>Nop, it doesn't make any noticeable difference (quit or "everything
>beginning
>with quit")
>
>class VIEW_ROUTE {
>    idle-timeout 3;
>    permissions view;
>    allow-commands "(^show route|^quit)";
>    deny-commands .*;
>}
>
>viewer_route at PARIS> ?
>Possible completions:
>  show                 Show information about the system
>viewer_route at PARIS> quit
>                    ^
>unknown command.
>viewer_route at PARIS>
>
>Rgds,
>
>Nicolas.
>
># isn't it 
># allow-commands "(^show route|^quit)"; 
># deny-commands .*; 
># instead of 
># isn't it allow-commands "(^show route|quit)"; 
># deny-commands .*; 
># R/ 
># Mourad 
>
>
>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>