[[j-nsp] How to rate limit ftp traffic]

[Joshua Sahala]

afaik, destination should be ftp, not source

/joshua

"hhadiwinoto at hotpop.com" <hhadiwinoto at hotpop.com> wrote:
> Hi all,
> 
> i have simple question related with rate limit ftp traffic. i want to limit
> all the ftp traffic out of my networks..
> 
> i have configured rate-limit as below,
> 
> from {
>     protocol tcp;
>     source-port [ ftp-data ftp ];
> }
> then {
>     policer ftp-500k;
>     count policer-ftp;
> 
> but it didnt work since most the ftp servers use passive mode which use
> port greater than 1024. any helps will be appreciated.
> 
> 
> regards
> hendro
> 
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 



"Walk with me through the Universe,
 And along the way see how all of us are Connected.
 Feast the eyes of your Soul,
 On the Love that abounds.
 In all places at once, seemingly endless,
 Like your own existence."
     - Stephen Hawking -