[j-nsp] bridge ethernet over atm ( DSL )

Hannes Gredler hannes at juniper.net
Fri Jun 20 02:01:17 EDT 2003


On Mon, Jun 16, 2003 at 01:35:11PM +0200, pourtier at ornis.com wrote:
| Hello,
| 
| I Would like to know if it is possible to do bridge ethernet connections
| over ATM between Juniper M5 and CISCO 806.
| 
| I already have connections between My JUNIPER M5 and CISCO 827 with vp / vc
| 8/35 ( in france )
| 
| here is a sample configuration if my interface :
| 
| 
| noc at TEST# show interfaces at-0/0/0 unit 101
| description TEST;
| vci 1.101;
| shaping {
|     cbr 498432;
| }
| oam-period 5;
| oam-liveness {
|     up-count 1;
| }
| family inet {
|     address 10.101.1.1/30;
| }
| 
| [edit]
| 
| 
| here is my JUNOS : JUNOS 4.3R2 built 2001-02-22 03:24:10 UTC
| 
| Should I upgrade my JUNOS ? and is there a person who have already done
| this kind of connections ?

ether-over-ATM is not supported in that 4.3 - pls upgrade to [at least
5.3 where the feature got introduced], better 5.5, 5.6, 5.7 coz 5.3 is already
EOL]

/hannes


More information about the juniper-nsp mailing list