[j-nsp] Juniper <-> Cisco GRE

[Me]

You can do GRE on GSRs, you just have to dedicate a whole Engine 2 OC48 
card to act as a tunnel server card (cannot use it as an oc48 card at 
the same time)...


On Tue, 20 May 2003, Link King wrote:

> Date: Tue, 20 May 2003 05:02:59 -0700 (MST)
> From: Link King <king at kinger.net>
> To: Dmitri Kalintsev <dek at hades.uz>
> Subject: Re: [j-nsp] Juniper <-> Cisco GRE
> Resent-Date: Tue, 20 May 2003 07:19:26 -0700 (MST)
> Resent-From: Link King <king at kinger.net>
> Resent-To: juniper-nsp at puck.nether.net
> Resent-Subject: Re: [j-nsp] Juniper <-> Cisco GRE
> 
> 
> Nope.  Have the tunnel services PIC and the Cisco's aren't GSR's.
> 
> -Link
> 
> > Hope you're not forgetting the need for a tunnel service PIC on a Juniper
> > side and inability to do tunnels on Cisco side if your Cisco is GSR?
> >
> > I'm talking about tunnel for actual pass-through (not RE-generated) traffic,
> > in both (Cisco & Juniper) cases, of course.
> >
> > On Mon, May 19, 2003 at 01:47:28PM -0700, Link King wrote:
> > >
> > > Anyone have a simple/handy configuration example for setting up a GRE
> > > tunnel between a Juniper and a Cisco router?
> > >
> > > Link King
> > > king at kinger.net
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > ---end quoted text---
> >
> > SY,
> > --
> > D.K.
> >
> 
> Link King
> king at kinger.net
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 

-- 
-sean
Spoon!