[j-nsp] multi-line login message

[Steve Holman]

Keep the whole message in quotes and add \n to indicate end of line.  Make sure it's all typed in one line.
 
HTH,
Steve

________________________________

From: juniper-nsp-bounces at puck.nether.net on behalf of joshua sahala
Sent: Fri 11/14/2003 9:38 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] multi-line login message



hello all

i am trying to add a multi-line login message on my m20 (5.7R1.2);
however i cannot seem to figure out how to do it...my google searches
haven't yielded anything either (but i am probably using the wrong
search words).  so my question is this:  how would i go about adding the
below login message (if i can)?

thanks

/joshua

/* begin message */

############################################################
erus01.sjo1
############################################################

               Sahala Networking Services

Access to this device or the attached networks is prohibited
without express written permission.  Any unauthorized access
or use of this system is prohibited.  Activities on this
system are monitored and recorded and subject to audit. Use
of this system is expressed consent to such monitoring and
recording.  Violators will be prosecuted to the fullest
extent of both civil and criminal law.

           *** UNAUTHORIZED ACCESS PROHIBITED ***

/* end message */


"Walk with me through the Universe,
 And along the way see how all of us are Connected.
 Feast the eyes of your Soul,
 On the Love that abounds.
 In all places at once, seemingly endless,
 Like your own existence."
     - Stephen Hawking -



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp