[j-nsp] E3 subrate

[Ohnmacht, Steve, WCCO]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I believe you do a show pic <#> firmware  via a console connection to the 'control board'. Verify what version you the firmware is and contact juniper support. Looks like a firmware upgrade is in order. I tink... :)              

- -so




- -----Original Message-----
From: Dragan D. Vecerina [mailto:vexi at yubc.net]
Sent: Thursday, November 20, 2003 7:56 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] E3 subrate



I have a problem with subrate option on 4E3 PIC.

FPC 0            REV 01   710-001292   XXX   
  PIC 0          REV 01   750-002501   XXX   4x E3


configuration:

    e3-0/0/0 {
        e3-options {
            compatibility-mode digital-link subrate 22.2Mb;
        }
    }


/var/log/messages:

fpc0 E3(0/0): PIC FPGA version has no subrate support, needs upgrading 

Anyone knows what to do ?


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (MingW32)

iD8DBQE/vN36Evy93y/byuQRAvjeAJ9cs/OXlZeks2V5axss7G07OqljTwCfcdo5
9sTuwgdod2Woe6LUVj/djUs=
=4OPj
-----END PGP SIGNATURE-----