[j-nsp] IP-II CPU utilisation

[Josef Buchsteiner]

Wednesday, October 15, 2003, 6:54:29 AM, you wrote:
> Hi,

> How to check what is consuming the CPU resources of the IP-II?
> Also what could contribute to a high "heap utilisation" on the ssb?

Heap is the one you want to check how much memory you use on the
IP-II board. Remember this is all ukern and therefor heap is the
memory usage used.

I'm not sure what you mean with how to check. but you can use the
cli,snmp or xml to collected this information.



josefb at lab-re0> show chassis ssb
SSB status:
Slot 0 information:
  State                          Empty     
Slot 1 information:
  State                          Master    
  Temperature                 31 degrees C / 87 degrees F
  CPU utilization              3 percent
  Interrupt utilization        0 percent
  Heap utilization             6 percent
  Buffer utilization          43 percent
  Total CPU DRAM             256 MB
  Internet Processor II          Version 2, Foundry IBM, Part number 9
  Start time:                    2003-10-13 17:05:57 CEST
  Uptime:                        1 day, 17 hours, 4 minutes, 59 seconds




> System is M20 running Junos 5.6R2.4.

> Many thanks in advance.

> sonny
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp