[j-nsp] ospf default information originate

Hitesh Patel Hitesh at nildram.net
Mon Oct 20 04:02:57 EDT 2003


Hi,
 
Need to create policy for 0.0.0.0 and export in to OSPF area 0
 
Regards
 
Hitesh Patel 
-----Original Message-----
From: Ahmed Abdelghany [mailto:abdelghany at salec.com.eg] 
Sent: 20 October 2003 08:40
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] ospf default information originate


 
In E series the command "default information originate always" is used to
originate the default route into OSPF routing protocol, how could I
configure M series router to originate the default route into OSPF.
 
Best Regards, 
Ahmed Abdelghany 
======================= 
System Engineer 
Core Switching Products                         
Salec  Egypt                                       
52, Gameat el Dewal El Arabia st.                                 
Giza 12311 Egypt                                                   
Tel : +202 749 3518                                       
Fax : +202 7493517                                         
E-Mail : abdelghany at salec.com.eg                         
URL : www.salec.com.eg                                  
=======================                     
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/juniper-nsp/attachments/20031020/e5fead4c/attachment.htm


More information about the juniper-nsp mailing list