[j-nsp] altconfig and altroot

[Yuki Arif (JA/EID)]

Hello,
 
I am a newbie in Juniper Router.
 
I have Juniper M10.
 
I did an upgrade of JunOS from 5.6R1.3 to 6.2R1.5
 
Before I did an upgrade I did "request system snapshot" and the snapshot is saved in /altroot and /altconfig.
 
When I do "start shell" from cli and "df -k" I don't see /altroot and /altconfig. Are these directories not mounted ?
 
How can I see these directories ?
 
% df -k
Filesystem  1K-blocks     Used    Avail Capacity  Mounted on
/dev/ad0s1a    109345    30284    70314    30%    /
devfs              16       16        0   100%    /dev/
/dev/vn0        10950    10950        0   100%    /packages/mnt/jbase
/dev/vn1        34204    34204        0   100%    /packages/mnt/jkernel-6.2R1.5
/dev/vn2         8804     8804        0   100%    /packages/mnt/jpfe-M10-6.2R1.5
/dev/vn3         2054     2054        0   100%    /packages/mnt/jdocs-6.2R1.5
/dev/vn4        13444    13444        0   100%    /packages/mnt/jroute-6.2R1.5
mfs:127       1524335        3  1402386     0%    /tmp
/dev/ad0s1e     12117       24    11124     0%    /config
procfs              4        4        0   100%    /proc
/dev/ad1s1f  17287463   277622 15626844     2%    /var
% 
% 
% 
 
 
After the upgrade I did not do "request system snapshot", so I have 6.2R1.5 running on the flash and 5.6R1.3 on the hard disk.
 
Is there a command to see/check JunOS version in the hard disk ?
 
 
Thanks in advance
 
 
 
Best Regards
 
__________________________________________________ 

Yuki Arif