[j-nsp] M20, diff between FPC and FPC-E

[harry]

You can mix and match. Certain PIC, i.e., the ASP, require an E-FPC to run.
I think that the rule of thumb is PICs produced on, or after, release 6.0
require EFPC.

The E-FPC also provides visibility into queue counters, which makes testing
CoS much easier, and provides some added CoS capabilities. A table for the
later is at:

http://www.juniper.net/techpubs/software/junos/junos62/swconfig62-interfaces
/html/cos-config2.html


HTHs





> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Robert J. Adams (jason)
> Sent: Monday, April 26, 2004 2:19 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] M20, diff between FPC and FPC-E
> 
> 
> Hello,
> 
> On an M20, whats the difference between a FPC and FPC-E? Can you 
> mix/match them in a chassis?
> 
> Thanks,
> jason
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
>