[j-nsp] LDP breaks at MPLS/VPN Backbone

Jack.W.Parks at alltel.com Jack.W.Parks at alltel.com
Tue Apr 27 09:03:05 EDT 2004


I don't understand your question, but here are some docs concerning BFDP
& MPLS convergence.

http://www.juniper.net/techpubs/software/junos/junos62/swconfig62-routin
g/html/ospf-config24.html

http://ietfreport.isoc.org/ids/draft-raggarwa-mpls-bfd-00.txt



-----Original Message-----
From: Maher Adib [mailto:maher at pd.jaring.my] 
Sent: Saturday, April 24, 2004 8:10 AM
To: Parks, Jack W
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] LDP breaks at MPLS/VPN Backbone



On Apr 22, 2004, at 9:17 PM, <Jack.W.Parks at alltel.com> wrote:

> In simple terms, LDP will converge as fast as your IGP can converge. 
> Look into Bidirectional Forwarding Detection Protocol (on Juniper) to 
> speed convergence time.  As far as Fast Reroute, you need to 
> understand the topology requirements of fast reroute and deploy RSVP 
> for signaling.
>
>
> Jack
>
Thanks for your info.

BTW, does BFDP will glue together with IP routing and LDP? Since 
RFC2547 still refer to IGP eventhough there is a LDP break in the 
MPLS/VPN Backbone core router. We have this sort of experience with our 
router card which consider to be hardware failure. Of course if I'm 
running OSPF, it will choose the shortest path since the shortest path 
already LDP break, perhaps it will create blackholing in PE routing 
table.

On juniper devices and configuration, how can we escalate such a simple 
mechanism whereby it can re-route to another available paths when there 
is LDP break in the core?

thank you very much.

regards,

maher

******************************************************************************************
The information contained in this message, including attachments, may contain 
privileged or confidential information that is intended to be delivered only to the 
person identified above. If you are not the intended recipient, or the person 
responsible for delivering this message to the intended recipient, ALLTEL requests 
that you immediately notify the sender and asks that you do not read the message or its 
attachments, and that you delete them without copying or sending them to anyone else. 




More information about the juniper-nsp mailing list