[j-nsp] MSS Adjust

[Rubens Kuhl Jr.]

Juniper Netscreen has "set flow mss "and E-Series has "ip tcp
adjust-mss"(rings a bell ? :-) commands, but due to the nature of an
M-series router, I don't think it could do so without a service-PIC.


Rubens

----- Original Message ----- 
From: "Mellott, Eric" <mellotte at netcsc.com>
To: <juniper-nsp at puck.nether.net>
Sent: Thursday, August 26, 2004 1:55 PM
Subject: [j-nsp] MSS Adjust


Does Juniper have an equivalent of maximum segment size (MSS) adjust
that Cisco supports, .i.e. ip tcp adjust-mss?



Thank you,

Eric





_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp