[j-nsp] logical router commit error

[Jesper Skriver]

In the logical router, you have specified ge-0/3/0, but the interface
you quote is ge-0/1/0 - perhaps ge-0/3/0 isn't configured for vlan-tag ?

/Jesper

On Fri, Aug 27, 2004 at 12:13:35PM -0700, R Che wrote:
> I got following commit error with my logical router configuration. However, if I changed to unit 0, then I got another error as unit 0 is used by main router already. Anyone has any ideas?
> 
> user at m5#commit
> [edit logical-routers c2 interfaces ge-0/3/0]
>   'unit 1'
>     Only unit 0 is valid for this encapsulation
> error: configuration check-out failed
>  
> config snippet as below:
> version 6.3R1.3;
> logical-routers {
>     c2 {
>         interfaces {
>             ge-0/3/0 {
>                 unit 1 {
>                     vlan-id 100;
>                     family inet {
>                         address 172.16.0.10/30;
>                     }
>                 }
>             }
>         }
>     }
> }
> interfaces {
>     ge-0/1/0 {
>         vlan-tagging;
>         unit 0 {
>             vlan-id 520;
>             family inet {
>                 address 10.0.2.2/30;
>             }
>             family iso;
>             family mpls;
>         }
>     }
> }
> 
>  
> 
> 		
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail is new and improved - Check it out!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 

/Jesper

-- 
Jesper Skriver, jesper(at)skriver(dot)dk  -  CCIE #5456

One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone to bind them.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/juniper-nsp/attachments/20040827/80b35be0/attachment.bin