[j-nsp] Loopback Interfaces

[Bostjan Fele]

Youo cannot create additional loopback interfaces. Try applying additional
addresses on lo0.

Regards,
Bostjan

--------------------------------------------------------
Boštjan FELE
CCIE #12594, InfoSec, JNCIS-M
E-mail: bostjan.fele at smart-com.si
Smart Com, d.o.o.
Brnciceva 45, 1001 Ljubljana, Slovenia
URL: http://www.smart-com.si
Tel.:  +386-1-5308-312
Fax.: +386-1-5611-571
Mob.: +386-41-399-363
---------------------------------------------------------

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of av srikant
Sent: Wednesday, December 01, 2004 7:52 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Loopback Interfaces

Hi All,

what is the command to create a new Loopback interfaces  ( with any number)
in Juniper M40e Series Router?

Regards,
srikant

_________________________________________________________________
NRIs!
http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm
Choose values with free money transfers!

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp