[j-nsp] M7i lockup
Josef Buchsteiner
josefb at juniper.net
Mon Dec 13 03:07:17 EST 2004
Richard,
this looks like a problem on the ASM with the pfe manager
running out of resource. I would guess that the ASM PIC
performed a reset along with the core file. I don't understand
yet why this would have caused problem with the routing protocols.
Please supply to jtac the following information for further
investigations
show chassis hardware
show log messages
show configuration
show version
the core file under /var/tmp/ /var/crash
thanks
Josef
Sunday, December 12, 2004, 9:53:02 PM, you wrote:
RH> Hi,
RH> One of our m7i's just locked up for about 45 minutes, than started
RH> routing again. no physical links went down, only the protocols.
RH> This is what the messages file says:
RH> Dec 12 21:11:48 (FPC Slot 1, PIC Slot 2) PFEMAN: can't send msg, no
RH> semaphore
RH> Dec 12 21:11:50 (FPC Slot 1, PIC Slot 2) PFEMAN: can't send msg, no
RH> semaphore
RH> Dec 12 21:11:51 (FPC Slot 1, PIC Slot 2) PFEMAN: can't send msg, no
RH> semaphore
RH> Dec 12 21:11:54 (FPC Slot 1, PIC Slot 2) PFEMAN: can't send msg, no
RH> semaphore
RH> Dec 12 21:12:15 (FPC Slot 1, PIC Slot 2) last message repeated 11 times
RH> Dec 12 21:14:14 (FPC Slot 1, PIC Slot 2) last message repeated 60 times
RH> Dec 12 21:24:14 (FPC Slot 1, PIC Slot 2) last message repeated 306
RH> times
RH> Dec 12 21:27:29 (FPC Slot 1, PIC Slot 2) last message repeated 100
RH> times
RH> Anyone what this can be? slot 1 pic slot 2 is the build-in ASM.
RH> gr, Richard
RH> _______________________________________________
RH> juniper-nsp mailing list juniper-nsp at puck.nether.net
RH> http://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list