[j-nsp] Cisco OSPF Configuration

[Sabah uddin Ahmed]

Dear all

These are the Cisco Configuration file snap shot
router ospf 30
 router-id 10.17.1.1
 log-adjacency-changes
 redistribute static
 passive-interface FastEthernet0/0
 passive-interface Serial3/1
 passive-interface Serial3/2
 network 172.16.254.240 0.0.0.15 area 0
 network 172.17.0.0 0.0.255.255 area 30
 network 172.19.0.0 0.0.255.255 area 40
 maximum-paths 3

I am very thankful if any body guide how to convert this in Juniper
Configuration

Regards
Sabah