[j-nsp] Cisco OSPF Config

Vladimir S. Blazhkun xeroform at internet2.ru
Mon Dec 27 07:34:10 EST 2004


> Dear all,
>
>
>
> These are the Cisco Configuration file snap shot
>
> router ospf 30
>
> router-id 10.17.1.1
>
> log-adjacency-changes
>
> redistribute static
>
> passive-interface FastEthernet0/0
>
> passive-interface Serial3/1
>
> passive-interface Serial3/2
>
> network 172.16.254.240 0.0.0.15 area 0
>
> network 172.17.0.0 0.0.255.255 area 30
>
> network 172.19.0.0 0.0.255.255 area 40
>
> maximum-paths 3
>
>
>
> I am very thankful if any body guide how to convert this in Juniper
>
> Configuration
>
>
>
> Regards
>
> Sabah

To write proper configuration we need you to post output of:

show ip interface brief

-- 
Vladimir S. Blazhkun,
Lead IP NCC Specialist, OOO "PCS-Moscow",
Work phone: +7 095 7847617.


More information about the juniper-nsp mailing list