[j-nsp] Re: juniper-nsp Digest, Vol 15, Issue 7

[Harpreet Singh]

In Juniper, AFAIK, there is no way of load balancing on LSPs with unequal
ratios. Howevere, if you were willing to do some novel ways of doing this,
try the foll.

Assume, that you want to load balance in a 1:3 ratio, create 3 LSPs with
the same ERO and one ERO with the other ERO and then let there be LB on a
1:1 on the LSPs. This way you can utilise the LB on a 1:3 on the physical
link basis.

Harpreet Singh
Reliance Infocomm




Message: 5
Date: Fri, 6 Feb 2004 16:45:13 -0000
From: Damon Pegg <damon.pegg at uk.easynet.net>
Subject: [j-nsp] TE - load-balancing unequal ratios query?
To: "'juniper-nsp at puck.nether.net'" <juniper-nsp at puck.nether.net>
Message-ID:

<8C3A4EFFA0E7D411B3310008C7E6143B0913D433 at weatherwax.eltd.office.easynet.net>


Content-Type: text/plain;            charset="iso-8859-1"

I'm struggling to find the nob that allows me to load-balance across LSPs
with unequal ratios.  Can anyone put me out of my misery and let me know if
this is not possible or where the command is?          This is
straight-forward on
a.n.other vendor, where you simply specify a bandwidth under the tunnel
interface (tunnel mpls traffic-eng bandwidth x .)


any ideas?

Damon Pegg
Network Development
Easynet plc
t:    0207 900 7075
f:    0207 900 4443
m:    07931 406206
e:    damon.pegg at uk.easynet.net
w:    www.easynet.com



------------------------------

_______________________________________________
juniper-nsp mailing list
juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp


End of juniper-nsp Digest, Vol 15, Issue 7
******************************************