[j-nsp] troubleshooting High CPU usage

[Kisito Nguene Ndoum]

Hi Milind,

If the CPU usage is continuously high, you can try "show system processes 
extensive | no-more"
to determine which processes are consuming that CPU.

The next steps of your investigation will depend on the processes involved.

Regards,
- Kisito

At 07:13 AM 2/10/2004, Milind Deshpande wrote:




>Hi,
>On Juniper M40e Router, CPU Usage are close to 90%, but interrupts are only
>2%.
>How to catch the improper behavior..?
>
>Many Thanks / Milind.
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp