[j-nsp] Juniper Router MPLS PROBLEM

[pramod babu G]

hi,
 This is the output on a juniper router .....
It has no LSP bu there is some MPLS Tag. Is it possible.....?????
And as far a i know MPLS node should be one of egress/ingress/Transit...
But the three are zero. And here is output .....
show mpls lsp
 Ingress LSP: 0 sessions
 Total 0 displayed, Up 0, Down 0

 Egress LSP: 0 sessions
 Total 0 displayed, Up 0, Down 0

 Transit LSP: 0 sessions
 Total 0 displayed, Up 0, Down 0


show mpls interface
 Interface        State       Administrative groups
 at-0/3/0.1       Up         <none>
 gr-1/2/0.901     Up         <none>
 gr-1/2/0.601     Up         <none>


show mpls cspf
 CSPF statistics
 Queue length   current       maximum      dequeued
                     0             0              0
 Paths            total    successful      no route
   sys error         CSPFs
                      0             0             0
           0             0
 Time (secs)      total         CSPFs  avg per CSPF
    % of rpd
               0.000000      0.000000      0.000000
      0.0000

sh <labels>
 Input label database,
219.64.224.112:0--219.64.255.193:0
  Label     Prefix

102144     219.64.224.112/32
 102448     219.64.226.112/32
 102192     219.64.232.112/32
      3     219.64.255.193/32
 102112     219.64.255.194/32