[j-nsp] required re to suport full bgp table

[Blaz Zupan]

> > Trying to spec up a juniper m5/m10/m40, main requiremnt is that we need to
> > hold a full bgp routing table, is there a mimimum spec of routing engine
> > we should be looking at.
>
> if not 500 views of the full table, any will do it

Not true. We have just three full BGP views and with 256MB RAM on a M5 the box
started swapping heavily, to the point that a "commit" took 2 minutes and a
BGP route change took 5 minutes to be seen in the "show route" output. But at
least the box survived because it swapped, a Cisco can not swap :-)