[j-nsp] switching CLNS over MPLS

[Gary Tate]

Yes you can use VLAN-CCC, you can also use VPLS and L2VPNs as well as 
other CCC encapsulations for different interfaces. A simple test of 
your config would be to bring up an ISIS adjacency over the L2 
connection.

Thanks
Gary

On Feb 24, 2004, at 3:11 AM, Ahmed Abdelghany wrote:

> Can I use the VLAN-CCC to switch CLNS packets over MPLS between two 
> sites to connect CLNS servers using M series routers and it not, is 
> there another way?
>
>  
>
> Best Regards,
>
> Ahmed Abdelghany
>  Salec  Egypt                                      
>
>
>
>  ++++++CONFIDENTIALITY NOTICE+++++
>
>  The information in this email may be confidential and/or privileged. 
> This email is intended to be reviewed by only the individual or 
> organization named above. If you are not the intended recipient or an 
> authorized representative of the intended recipient, you are hereby 
> notified that any review, dissemination or copying of this email and 
> its attachments, if any, or the information contained herein is 
> prohibited. If you have received this email in error, please 
> immediately notify the sender by return email and delete this email 
> from your system.
>
>   
>
>  
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp