[j-nsp] Aggregate and directly connected routes (route preference)

[Robin Balen]

> -----Original Message-----
> From: Gary Tate [mailto:gtate at juniper.net] 
> Sent: 27 January 2004 01:49

Gary,

Thanks for the swift reply!

> Why not just advertise the /24 routes via bgp why create an aggregate 
> when the route already exists?

This is the source of the advertisement. The equivalent Cisco IOS command
would be:

 network 5.5.5.0
 network 6.6.6.0

Then set 5.5.5.1 and 6.6.6.1 as addresses on a FE port.

> Do you necessarily need this as an aggregate?

No - this just seemed like a fairly straightforward way of achieving what I
wanted... If you could give any pointers to a more effective method please
let me know!

Regards

Robin Balen