[j-nsp] Need help on configuring M10

Janto Cin jantocin at datacomm.co.id
Fri Jan 30 03:38:29 EST 2004


I already tried using logical router or routing-instances virtual router,
and both ways satisfied my objective.
Is there any other way such as filter-based forwarding?
or If I used logical router and/or routing-instance will it have any
restrictions in the future?

TIA,
Janto
----- Original Message -----
From: "Joe Lin" <jlin at doradosoftware.com>
To: "'Janto Cin'" <jantocin at datacomm.co.id>; "'Gary Tate'"
<gtate at juniper.net>
Cc: "'Gary Tate'" <gtate at juniper.net>; <juniper-nsp at puck.nether.net>
Sent: Thursday, January 29, 2004 1:30 PM
Subject: RE: [j-nsp] Need help on configuring M10


You should either use virtual-routers, or create forwarding routing
instances...

Doesn't sound like any IP/VPN is required here


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Janto Cin
Sent: Wednesday, January 28, 2004 9:13 PM
To: Gary Tate
Cc: Gary Tate; juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Need help on configuring M10

VRFA and VRFB is in same PE router.
Only one M10 and it should not running MPLS.

PE (VRFA)------- M10 -------- ISPA
PE (VRFB)------- M10 -------- ISPB

Janto

----- Original Message -----
From: "Gary Tate" <gtate at juniper.net>
To: "Janto Cin" <jantocin at datacomm.co.id>
Cc: "BERKANE Mourad" <mourad.berkane.prestataire at sfrcegetelsi.fr>;
<juniper-nsp at puck.nether.net>; "Gary Tate" <gtate at juniper.net>
Sent: Thursday, January 29, 2004 11:28 AM
Subject: Re: [j-nsp] Need help on configuring M10


OK so are both interfaces connected to the vrf:
               M10
  CEA -------- VRFA -------- ISPA
  CEB -------- VRFB -------- ISPB

If so this should be easy.

If this is what you want then you should probably use virtual-routers
and not vrfs

I am still unsure why you want to use a vrf?  Do you need to run 2547
vpns?

Gary


On Jan 28, 2004, at 7:52 PM, Janto Cin wrote:

> I'm trying to advertise IPv4 routes received from VRFA EBGP neighbor
> to ISPA
> and routes received from VRFB EBGP neighbor to ISPB, the prefixes from
> both
> VRF is same.
> When there is packet from prefix VRFA to ISPA, the out & in packet
> should
> use link b/w VRFA and M10.
> When there is packet from prefix VRFB to ISPB, the out & in packet
> should
> use link b/w VRFB and M10.
> ISPA and ISPB routers not running MPLS, M10 act as Border Gateway
> Router.
> TIA,
> Janto
>
> ----- Original Message -----
> From: "Gary Tate" <gtate at juniper.net>
> To: "Janto Cin" <jantocin at datacomm.co.id>
> Cc: "BERKANE Mourad" <mourad.berkane.prestataire at sfrcegetelsi.fr>;
> <juniper-nsp at puck.nether.net>
> Sent: Thursday, January 29, 2004 10:08 AM
> Subject: Re: [j-nsp] Need help on configuring M10
>
>
>> Any reason why you are using VRFs for this.  Are you simply trying
>> to separate the routing or do you wish to advertise IPv4-VPN routes
>> to ISPA and ISPB.  If you are not running MPLS are you running
>> something else between you M10 PE and the PEs in ISPA and ISPB
>>
>> If you are trying to separate routing and advertise the prefixes
>> then you should look at configuring Virtual Routers and not VRFs.
>>
>> If you could give more information on what you are trying to achieve
>> this would help.
>>
>> Gary
>>
>> Janto Cin wrote:
>>> Oops sorry not to mention if M10 not running MPLS.
>>>
>>>     ----- Original Message -----
>>>     From: BERKANE Mourad
>>>     <mailto:mourad.berkane.prestataire at sfrcegetelsi.fr>
>>>     To: 'Janto Cin' <mailto:jantocin at datacomm.co.id>
>>>     Cc: juniper-nsp at puck.nether.net
>>> <mailto:juniper-nsp at puck.nether.net>
>>>     Sent: Wednesday, January 28, 2004 7:43 PM
>>>     Subject: RE: [j-nsp] Need help on configuring M10
>>>
>>>     In your M10, the two prefixes 9.9.9.9/32 must be attached with
>>>     differents RD.
>>>     You have just to play correctly in your VRFs import/export rules
>>> by
>>>     using the right RD/RT.
>>>
>>>     R/
>>>     Mourad
>>>     -----Message d'origine-----
>>>     De: Janto Cin [mailto:jantocin at datacomm.co.id]
>>>     Date: mercredi 28 janvier 2004 11:43
>>>     À: juniper-nsp at puck.nether.net
>>> <mailto:juniper-nsp at puck.nether.net>
>>>     Objet: [j-nsp] Need help on configuring M10
>>>
>>>
>>>     VRFA -------- M10 -------- ISPA
>>>     VRFB -------- M10 -------- ISPB
>>>
>>>     VRFA and VRFB in one router (AS1).
>>>     M10 (one router with different interfaces) in AS2.
>>>     ISPA in AS3 and ISPB in AS4.
>>>     VRFA advertise prefix 9.9.9.9/32 to M10 as well as VRFB.
>>>
>>>     How to configure M10 to advertise prefix 9.9.9.9/32 received
from
>>>     VRFA to
>>>     ISPA and advertise prefix 9.9.9.9/32 received from VRFB to ISPB?
>>>
>>>     TIA,
>>>     Janto
>>>
>>>     _______________________________________________
>>>     juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>     http://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>>
>>>
---------------------------------------------------------------------
>>> ---
>>>
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list