[j-nsp] redundant bad power supply

[Joe Lin]

You could filter out those messages from your NMS system.

Or setup a snmp trap group w/o any chassis alarms.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
telecom at servidor.unam.mx
Sent: Thursday, July 01, 2004 12:30 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] redundant bad power supply


Hi, Is there any way other than replacing the power supply to stop these

messages.. 

Jul  1 11:40:05.965  m20-1 chassisd[4479]: CHASSISD_SNMP_TRAP6: SNMP
trap 
generated: Power Supply failed (jnxContentsContainerIndex 2,
jnxContentsL1Index 
1, jnx ContentsL2Index 0, jnxContentsL3Index 0, jnxContentsDescr Power 
Supply A, jnxOperatingState/Temp 6)

I have a bad fan but no time nor money to replace it now.. so just
making 
sure i have no alternatives

m20-1> show chassis alarms    
1 alarms currently active
Alarm time               Class  Description
2004-06-30 10:35:15 PDT  Major  Power Supply A fan failed

Thanks

-- 
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp