[j-nsp] PPPoEoV on ERX

[R Che]

Hi thanks. but the links only tells about enabling pppoe on the interface.
I'm trying to terminate pppoe session on an Ethernet interface or a vlan subinterface and enable radius server for local authentication. Do you have a complete config as I'm pretty new to ERX? I've done this on Cisco but ERX is different though cli looks similar.
Thanks.

Damien Holloway <damien at holloway.id.au> wrote:
Try this...


http://www.juniper.net/techpubs/software/erx/junose52/swconfig-physical/html
/ethernet-config8.html#376557



Regards

Damien

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of R Che
Sent: Monday, July 05, 2004 9:36 AM
To: Juniper NSP
Subject: [j-nsp] PPPoEoV on ERX

Does anyone have a sample for PPPoEoV and PPPoE configs on ERX?
Thanks.



---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp


		
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!