[j-nsp] Connect Retry interval for LDP.

[bageshri kundu]

Hi,

Could someone let me know what the Connect retry interval for LDP means on Juniper M10? Also is this configurable?

Is Juniper able to setup targeted LDP sessions between directly connected peers?

Thanks,

Bageshri

user at host> show ldp session detail

Address: 10.255.245.220, State: Operational, Connection: Open, Hold 
time: 27
  Session ID: 10.255.245.217:0--10.255.245.220:0
  Next keepalive in 7 seconds
  Passive, Maximum PDU: 4096, Hold time: 30, Neighbor count: 1
  Keepalive interval: 10, Connect retry interval: 5
  Local address: 10.255.245.217, Remote address: 10.255.245.220
  Up for 00:00:13
  Authentication type: MD5 
  Restarting, restart complete in 60000 msec
  Local - Restart: enabled, Helper mode: enabled, Reconnect time: 60000
  Remote - Restart: disabled, Helper mode: disabled
  Next-hop addresses received:
    so-0/2/0.0
    192.168.37.94
    192.168.37.96


 


		
---------------------------------
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.