[j-nsp] Try to set CE1 IQ's pic clocking to external

[Hannes Viertel]

hi sean,

you set the ce1 interface to clocking external. A show interface
ce1-0/0/1 will show that. 

The ds interface is a separate interface and that's why the juniper
default ( clocking internal ) is showen there.

Clocking is a "per physical e1" parameter, so at a sub-e1 ds interface
level it wouldn't make much sense anyway... 


hope that helps

hannes






> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Tech Zone
> Sent: Montag, 12. Juli 2004 04:27
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Try to set CE1 IQ's pic clocking to external
> 
> 
> Hi all,
> 
> I tried to set CE1 IQ's interface clocking to external
> but when show interface ds-0/0/1:1, it still shown
> internal clocking. Below is the configuration :- 
> 
> [edit]
> m20 at lab# show interfaces ce1-0/0/1 
> clocking external;
> partition 1 timeslots 1-6 interface-type ds;
> 
> [edit]
> m20 at lab# show interfaces ds-0/0/1:1 
> unit 0 {
>     family inet {
>         address 10.1.1.1/30;
>     }
> }
> 
> am i missed out anything ?! 
> Kindly help, millions thanks.
> 
> Regards,
> Sean
> TechZone
> 
> 
> 
> 		
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - Send 10MB messages! 
http://promotions.yahoo.com/new_mail 
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp