[j-nsp] Acounting class ussage

[Joe Soricelli]

If you're running newer software (6.2 or later I think) there is an
apply-groups-except command which you can configure on the fxp interface
to not inherit the group configuration.

-joe

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Daniel Verlouw
> Sent: Tuesday, July 13, 2004 3:41 AM
> To: Anton Schweitzer
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] Acounting class ussage 
> 
> 
> On Jul 13, 2004, at 9:23 AM, Anton Schweitzer wrote:
> >
> > [edit groups interface-defaults interfaces <*>]
> >
> > unit <*> {
> >    accounting-profile xxx_accounting_profile;
> >    family inet {
> >        accounting {
> >            destination-class-usage;
> >        }
> >    }
> > }
> >
> > commit check
> >
> >
> >  'accounting'
> >     Can not configure inet accounting on local RE interfaces
> > error: configuration check-out failed
> 
> I believe you cannot turn on accounting for the fxp0 
> interface (the RE 
> management interface). If you apply this group on the [edit 
> interfaces] 
> level, it would also apply to the fxp0 interface.
> 
> Rewrite your group regular expression so it excludes fxp0 -or- apply 
> the group on individual interfaces only (downside is that 
> you'd have to 
> include the apply-groups statement multiple times).
> 
> -Daniel.
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
>