[j-nsp] PIC hotswappable?

Eric Van Tol eric at atlantech.net
Thu Jul 15 14:32:05 EDT 2004


This is not true.  PICs are hot-swappable:

http://www.juniper.net/techpubs/hardware/m5-m10/m5-m10-hwguide/system-fr
u.html#system-fru

On M20, you typically need to pull out to FPC because of the lack of PIC
guides and ejectors, although if you are very careful, you can slide
them in and out without removing the FPC, depending on the PIC.

-eric

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Streiner,
Justin
Sent: Thursday, July 15, 2004 2:20 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] PIC hotswappable? 


On Thu, 15 Jul 2004, R Che wrote:

> Is PIC hot-swappable in M-series? I tried this on M5, and it doesn't
seem to.

No.  The FPCs that hold the PICs are hot-swappable, but you have to
remove
the FPC from the chassis if you want to add/replace/remove a PIC.

jms
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list