[j-nsp] prompt lag when executing show route advertising-protocol bgp <ipv6-neighbor>

[Jeroen Valcke]

Hi,

Executing "show route advertising-protocol bgp <ipv6-neighbor>" results
in a prompt lag. It takes up to 20 seconds before I get the result (one
sinle /32 prefix) and the prompt back.

Strangly enough this only happens with peers in a specific group.
Executing "show route receiving-protocol bgp <ipv6-neighbor>" works
fine. Router is an M160 with JunOS 6.1R4.5

Any clues?

-Jeroen-

-- 
Jeroen Valcke