[j-nsp] Details of show ted output

[Jeremy Wallace]

Bala,

The LnkIn shows how many nodes point towards this node, and LnkOut shows
how many nodes this node points toward.  Here is the doc that points
this out:

http://www.juniper.net/techpubs/software/junos/junos62/swcmdref62/html/mpls-monitor13.html

J.

On Wed, 28 Jul 2004 15:41:46 -0700
Bala S Venkata <balavenkata at netscape.net> wrote:

BSV> HI,
BSV> 
BSV> In the output of "show ted database" what does LnkIn and LnkOut
BSV> really mean ? In the following sample, you can see the LnkIn is
BSV> 3 and LnkOut is 1. I am trying to understand what it means
BSV> (especially why it shows a mismatch).
BSV> 
BSV> ------------------------------
BSV> user at host# run show ted database 192.168.0.102
BSV> TED database: 0 ISIS nodes 6 INET nodes
BSV> ID                            Type Age(s) LnkIn LnkOut Protocol
BSV> 192.168.0.102                 Rtr   59244     3      1 OSPF(0.0.0.0)
BSV> .....
BSV> ------------------------------
BSV> 
BSV> 
BSV> Thanks !
BSV> 
BSV> /bala
BSV> 
BSV> 
BSV> 
BSV> _______________________________________________
BSV> juniper-nsp mailing list juniper-nsp at puck.nether.net
BSV> http://puck.nether.net/mailman/listinfo/juniper-nsp