[j-nsp] bridging in junos 6.0R1.3

[Erik Haagsman]

Hi Patrik,

On Thu, 2004-06-03 at 14:47, Patrik Joly wrote:
> I've been trying to fix this a couple of days now and have not been
> succesful so far. How about bridging vlans between different interfaces
> using junos 6.0R1.3 when the machine has two "1X G/E 1000 Base-SX" Rev 04
> interfaces and two "4X F/E 100 Base-TX interfaces? 

A Juniper doesn't automtically bridge like a Layer 2 device, so you
can't just assign the same vlan-id on different interfaces and have the
router bridging traffic (which I assume is wat your tried...?)

> Is it possible? I haven't
> been able to configure vlan bridging between any of the interface so far.

Yes it's possible, check the ccc (circuit cross-connect) configurarion
in the interfaces guide.


Cheers,


-- 
---
Erik Haagsman
Network Architect
We Dare BV
tel: +31(0)10 7507008
fax:+31(0)10 7507005
http://www.we-dare.nl