[j-nsp] M20 redundant RE

[Yu-lin Chang]

Hi Jason,

I have asked the same question to Juniper local support.
Their answaer is "It is not supported to use different 
version of RE in the same box".

But I did install RE-2.0 and RE-3.0 in a M160 at the same
time and it works on master/slave switching. 

After few weeks, I replaced the RE-2.0 with RE-3.0 just because
I like to have a full support contract from Juniper local office.


Regards,
Yu-lin

----- Original Message ----- 
From: "Robert J. Adams" <radams at siscom.net>
To: <juniper-nsp at puck.nether.net>
Sent: Saturday, June 05, 2004 12:14 PM
Subject: [j-nsp] M20 redundant RE


Hello,

When using two RE's on a M20 (primary and secondary) do they have to be 
identical (speed/ram/etc)?

Thanks,
jason

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp