[j-nsp] DHCP Relay on an VRF interface

Elmar Kirchner elmar at juniper.net
Fri Jun 25 06:07:03 EDT 2004


Hi Carsten,

try vrf-table-label. For more details have a look at the VPN manual and search for this keyword.

/elmar




At 10:51 AM 6/25/2004, Strahler, Carsten wrote:
>Hi,
>
>i try to configure a DHCP Relay over a L3 MPLS-VPN. 
>The client on the remote site sent dhcp requests and the Juniper
>forwards them to the central DHCP server. In the log of the server I see
>the request and the assignment of the ip addresses. 
>But the client doesn't get the response. 
>My assumption is, that the DHCP server sent the response to the
>address of the VRF interface of the remote Juniper. But the Juniper
>isn't able to do the second lookup. I don't want to install a tunnel PIC
>and there is no server with a static IP address on the remote site.
>
>Any ideas ???  
>  
>
>------------------------------------------------------------
>Carsten Strahler
>
>IP Planning 
>
>Lambdanet Communications Deutschland AG (AS 13237)
>Guenther-Wagner-Allee 13
>D-30177 Hannover (Germany)
>
>Phone   +49 (0)511 / 84 88 12 57
>Mobile  +49 (0)173 / 629 1257
>Fax     +49 (0)511 / 84 88 12 59
>mailto:carsten.strahler at lambdanet.net
>
>web: www.lambdanet.net
>-----------------------------------------------------------
>
>
>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp 



More information about the juniper-nsp mailing list