[j-nsp] juniper dram upgrades

[Richard A Steenbergen]

On Wed, Mar 17, 2004 at 09:24:52AM -0800, Kevin Oberman wrote:
> > Date: Wed, 17 Mar 2004 06:45:30 -0800 (PST)
> > From: Jeff Szczerbinski <jeff at themtntop.com>
> > Sender: juniper-nsp-bounces at puck.nether.net
> > 
> > hi,
> > has anyone out there found a 3rd party source for RE
> > dram upgrades? i have a m10 with just 512mb and want
> > to upgrade it to 2048.
> > 
> > if no one has found a 3rd party that advertises
> > specifically Juniper memory.... has anyone out there
> > identified the memory specs and put in generic memory?
> 
> The RE is a stock Pentium blade and uses generic DRAM. I believe that
> PC100 is the correct spec, but I'd hope someone else will confirm that.

The RE-2.0 (which his system is not) uses 3x256MB PC100 ECC low density / 
low profile dimms. They will accept up to 512MB per slot if you have some 
server ram sitting around, but the BIOS will not recognize more than 768MB 
total, and will ignore dimms above this (if you have 1x512 1x256mb it will 
do 768mb, but if you have 2x512mb is will only see 512mb total).

Since he's talking about 512mb/2048mb he's talking about the RE 3.0, to 
which I have no idea. It is a p3 600 so it probably isn't too far off, 
maybe pc 133?

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)