[j-nsp] Connected Networks in a prefix list ?

[Paul Goyette]

That should be fixed in current code.  If not, please contact JTAC.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Anton
Schweitzer
Sent: Tuesday, May 25, 2004 4:01 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Connected Networks in a prefix list ?


Hi,
is there an elegant way to get the connected networks into a prefix list ?

something like that :

 'apply-path "interfaces <*> unit <*> family inet address <*>"'
    'xx.xx.xx.xx/30' has non-zero bits where bits in mask are zero
error: configuration check-out failed

which is obv. not the solution.....


Cheers

Anton

-- 
Anton Schweitzer                        phone: +49 89 92699 0
Security Engineer                       fax  : +49 89 92699 809
Cable & Wireless                        mailto:schweita at de.cw.net
Telecommunication Services GmbH		
D-80687 Muenchen / Germany
http://www.cw.com/de



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp