[j-nsp] Redundant SSB

[Jonas Frey (Probe Networks)]

Hi,

i just installed a second SSB-E into a M20 and i am not sure if it works.
The front LED "offline" is lighted amber.
With "show chassis env" i only see SSB0, with "show chassis hardware" i see:
SSB slot 0       REV 01   710-001951   AG7741            Internet
Processor IIv1
SSB slot 1       N/A      N/A          N/A               backup

Does this mean all is fine?
Is there a way to test the second SSB-E without rebooting the whole box?
(And without having someone to pull the 1st SSB-E remotely)

-- 
Mit freundlichen Grüßen,
Jonas Frey

----------------------------------------------------------------
Probe Networks Jonas Frey        e-Mail: jf at probe-networks.de
Provinzialstr. 104               D-66740 Saarlouis
Tel: +(49) (0) 180 5959723       Fax: +(49) (0) 80 5998480
Internet: www.probe-networks.de  Hotline: 0800 1656531
----------------------------------------------------------------


Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist stengstens untersagt.

This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the contents of this
e-mail is strictly prohibited.