[j-nsp] "monitor traffic" broken?

Eric Van Tol eric at atlantech.net
Mon Nov 1 13:30:00 EST 2004


monitor traffic only sees traffic source from that particular interface
or destined to that particular interface.  You cannot see traffic moving
*across* the interface - it's not meant to be used as a packet sniffer.

eric 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Daniel Roesen
Sent: Monday, November 01, 2004 1:24 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] "monitor traffic" broken?

Hi,

monitor traffic interface ge-0/0/0.123 matching "port 53"

This SHOULD show me all DNS traffic in/out this interface, correct?

But actually, I see only incoming traffic, and the matching term
is completely ignored. Same goes for "host x.x.x.x" or so.

Am I doing something wrong?


Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list